(Optional) Modbus TCP Server

This function is available only in Japan.

No.	Parameter	Parameter Description
1	Configuration	Click to set the detailed configuration of the Modbus TCP server.
2	SN	Enter the device serial number (SN) of the device where the Modbus TCP server is enabled.
3	IP	Enter the client IP address that will connect to the Modbus TCP server.
4	Broken link protection	When set to , enables the communication broken link protection function.
5	Communication loss detection	When set to , enables the communication loss detection function.
6	Dispatch loss detection	When set to , enables the power station dispatch command loss detection function.
7	Communication abnormal protection mode	No action: No protection mode, no operation is performed. Max self-consumption: Maximum self-consumption mode. Standby: Energy storage standby mode; the energy storage system neither charges nor discharges. Limit power: Limit power mode; does not support dispatch commands that exceed the power limit. Max active power: Maximum active power of the power station in communication broken link protection limit power mode. Min active power: Minimum active power of the power station in communication broken link protection limit power mode. Max reactive power: Maximum reactive power of the power station in communication broken link protection limit power mode. Min reactive power: Minimum reactive power of the power station in communication broken link protection limit power mode. Shutdown: Shutdown protection mode; remains shut down until the link is restored. Auto restart enable: When set to , enables automatic restart after communication is restored. When set to , disables automatic restart after communication is restored.