Setting&Tools
Viewing and upgradingApp version
To gain the best compatibility and performance, you are advised to upgrade the mySigen App regularly.
Tap "Settings" → "About" to view the App software version.
Tap "Settings" → "About" → "Version Update" to upgrade the App software version.
Configuring parameters on the "App Setting" screen
1
Dark Mode
Specifies the display style.
2
Language
Specifies the display language.
3
Sunrise/Sunset Time Format
Set a 12-hour system or a 24-hour system.
4
Temperature Unit
Sets the unit of temperature.
The unit of temperature commonly used in the local area is set by default. You can change this setting when needed.
5
Notification
Sets the App push notification permission.
This permission is set while the App is installed. You can make settings when needed.
6
Lab
Sets the access permission of Sigen AI.
You can ask Sigen AI about the product knowledge when the parameter is set to 
.
7
Diagnostic tool
If an exception occurs when you use the App, you can use this tool to generate operation logs and report to our customer support for analysis and solutions.
(Optional) Off-grid Self-powered Setting
This feature is only available in C&I power stations.
After the off-grid self-powered feature is enabled, the device can operate off-grid to supply power to construction equipment.
1
Off-grid self-powered device
When it is set to 
, the off-grid self-powered feature is enabled.
2
Output Mode
Single Phase: In this mode, the inverter draws power from phases L1 and L2 of the three-phase grid to supply power to single-phase loads.
Three-Phase Three-Wire: In this mode, the inverter draws power from phases L1, L2, and L3 of the three-phase grid to supply power to three-phase loads (Sigen PV (50–110)M1-HYB series is the load port).
3
Serial number of the connected device
Enter the SN of the self-powered device.
Last updated
Was this helpful?