General setting

Editing station type, name, and address

Software upgrade

You can use this function to check whether the system software is updated to the latest version and upgrade the device to the latest version when necessary.

Indicator Settings

When it is set to , you can set the LED lighting effect according to your preference. When "LED Strips" is set to "Power Flow," the flowing water lighting effect from the top down indicates that the battery pack and charger are charging and the flowing water lighting effect from the bottom up indicates that the battery pack and charger are discharging. The steady-on lighting effect indicates that the battery pack and charger are not charging or discharging.

No.	Parameter name	Description
1	Front	Click to set the front LED light mode.
2	LED Strips	Click to set the side LED light mode.

Connectivity

Click "Connectivity" to view the communication method of the power station connecting to the network.

No.	Parameter name	Description
1	Ethernet	Displays the connection status of Fast Ethernet. Do not disconnect the network cable when the Internet connection is stable.
2	WLAN	Displays the connection status of WLAN. Here you can configure the WLAN for all devices in the power station. Before configuring the WLAN, please make sure that antennas are installed on devices. Non-encrypted WLAN is not recommended as it may lead to Internet access failure. When WLAN is the only connection path for the devices to access the internet, switching WLAN to any other wireless router will be prohibited.
3	Cellular	Displays whether the 4G network is connected to the Internet. When 4G is used for communication users can view the monthly traffic usage and set a traffic usage threshold for each month.

It is recommended to use Fast Ethernet and WLAN for communication with inverters. When free 4G traffic of CommMod runs out, users must top up their accounts or replace an SIM card.