System Power-on/Power-off

High Voltage and Hazards:\ Wear personal protective equipment such as insulating gloves, insulating shoes, and safety hats while operating the equipment. Do not wear conductive accessories such as metal bracelets, rings, or necklaces.

System power-off

1. Power the equipment off in the App or manually.

App operation

Tap "Setting" in mySigen App to turn on/off the device.

Manual operation

Follow the steps shown to remove the side and top decorative cover, and press the ON/OFF switch button.

Press and hold for more than 3s to turn on or off the power; an interval of more than 10s is needed between power-on and power-off.

Major firmware upgrades can fail if the equipment is not connected to the internet for an extended period of time. When your equipment is not connected to the internet, the system will send you a reminder repeatedly. If the system does not receive feedback from you for a long time, the system will operate under limited conditions for security reasons. If you want to make the equipment fully functional, connect the equipment to the internet. The system will automatically restore its functionality. If you have further questions, please contact us for assistance.

1. Turn off the switch connected to the equipment in the backup power distribution panel.

2. Turn DC SWITCH on the equipment to the OFF position.

3. After all LED indicators on the equipment go off, wait for the corresponding time as indicated on the label on the equipment before proceeding.

There is residual current and the equipment is hot immediately after the equipment is powered off. Operating the equipment immediately upon power off may lead to electric shock or burns.

System power-on

1. Turn DC SWITCH on the equipment to the ON position.

2. Turn on the switch connected to the equipment in the backup power distribution panel.

3. Power the equipment on in the App or manually. For details, see Step 1 in System power-off.